Plinius Hautonga | Hi Fi Amplifier

Click on images to enlarge.
.
Description: A perfectly equipped and well balanced piece, the Hautonga further builds on the ground-breaking development of preceding PLINIUS integrated amplifiers. The rear panel is outfitted with five line level RCA inputs with Phono RCA and a balanced XLR pair additional as standard. Pre Out remains as does the Line Out connection for archiving or other ancillary equipment and the addition of trigger in and out connectors provide for multi-room or home theatre simplicity.
A new full function remote lets you scroll through inputs and importantly now includes access to the HT Bypass input. A new standby mode for true low power operation conserves energy while keeping the circuit active to deliver peak performance with minimal delay. Mute and volume controls are standard, as is the display brightness adjustment and the full complement of CD player functions. Careful attention has been paid to signals and circuit layout with shorter signal paths, optimal component placement and a new wiring specification working in harmony to extract exciting new depth and detail from any musical recording.
Finishes/Options: Available in Silver or Black
**********************************************************************************
Specifications:
• Power: 200 watts RMS per channel into 8 ohms. 280 watts RMS per channel into 4 ohms. Both channels driven from 20Hz to 20kHz at less than 0.2% total harmonic distortion
• Frequency Response: 20Hz to 20kHz ±0.2dB -3dB at 5Hz and -3dB at 70kHz
• Distortion: Typically less than 0.05% THD at rated power 0.2% THD and IM worst case prior to clipping
• Current Output: 40A short duration peak per channel. Fuse protected
• Slewing: 50V/µs
• Hum & Noise: 90dB below rated output 20Hz to 20kHz unweighted
• Gain: Line inputs to speaker out: 40dB. Phono Input To Pre-Out: 66dB on high gain, 60dB on low gain
• Input Impedance: 47k ohms all inputs
• Rated Pre Out Level: 1.5V RMS into 47k ohms or higher
• Pre Out Source Impedance: Typically 1.5k ohms
• Pre Out Minimum Recommended Load: 47k ohms
• Line Out Level: 190mV at 200 ohms
• Input Impedance: 47k ohms all inputs
• Input Impedance: 47k ohms all inputs
• Power/Current Consumption: 600VA 0.4A (92W) Class AB Idle 0.14A (32W) Standby
• Dimensions: Height: 120mm (4.75”) Width: 450mm (17.75”) Depth: 400mm (15.75”)
• Weight: 14kg (30lb)
Please download the PLINIUS HAUTONGA Brochure below for more information
**********************************************************************************
Warranty: Not applicable
Download: Plinius Hautonga Brochure
Manufacturer: visit the Plinius website here or see more Plinius products here.








